Ecoright Pre-Mixed Coloured Hydraulic Lime Mortar (Moderate Blend) - Stock Items

Price excludes vat
Condition: New
£10.50
Select Option
Product
  • Description
  • Related Products
  • Reviews

Ecoright mortars are produced using kiln dried sands and natural hydraulic lime.  The dry mortar is available in 25kg bags or bulk bags as well as Silo's and is suitable for use in blocklaying, bricklaying, stonemasonry, as well as a backing coat or final coat render or plaster.  Ecoright mortars are manufactured using natural hydraulic limes (NHL) which are produced by burning argillaceous or siliceous limestone. Ecoright mortars comply with the durability requirements of BS5628: Part 3: 2001.  Mortar strengths are measured at 91 days as opposed to 28 days, as lime mortars gain strength more gradually compared to Portland cement based mortars.

Materials used conform to the following standards:

Kiln Dried Sands & Pigments   BS EN 13139:  2002

Natural Hydraulic Lime (NHL)   BS EN 459:  Part 1:  2001

General Advantages of Ecoright:

Ecoright mortars offer several mix advantages.

*    Consistent mix proportions

*    Consistent quality of mortar

*    Mortars can be re-worked for up to 12hours.

Performance:

Ecoright mortars are more flexible than Portland cement based mortars, which means that expansion joints are not necessary in many circustances. Ecoright mortars offer good vapour permeability, which enables the building to breath. Ecoright mortars are formulated to meet the requirements of compressive strength and durability.

Coverage:

Ecoright mortars can be used for scratch coat and floating coat plasters and renders and have a coverage rate of 1.25m2 per 25kg bag (50m2 per tonne) @ 9mm thick

For bricklaying a 25kg bag will lay 25 bricks with a 10mm joint, and a single brick skin.  ( 1000 bricks per tonne of mortar)

Sitework:

Ecoright mortars can be delivered to site in 25kg bags or 1 tonne IBC's and now also in Silo's

When using 25kg bags, mixing can be undertaken using a conventional drum mixer.  The addition of water to the mix should be controlled to ensure that the mix does not become saturated.  For best results add water sparingly, waiting for the water to thoroughly disperse throughout the mix before adding more.  Once the desired consistency is reached continue mixing for a further 20 minutes.

For further product information click on url link below.
Note:  There are now 11 different colours available in the range.  Contact us for more information about cost & availability


/ekmps/shops/paulfarmer/resources/Other/new-ecoright-hydraulic-lime-mortar-product-sheet.pdf

                         

 CALL NOW FOR DETAILS:   0118  946 9146          


Customer Reviews
Write an online review and share your thoughts with other shoppers!